Post YOUR Hatchback here
User avatar
By JUICE
#147561 ***************Current Setup as of 1/2/15. page 45 and up of this build thread! ***************

Image

Image

Exterior/Interior

-All new steel full quarters/rockers, RUST FREE!!!
-13" Exospeed VPD w/ Mickey Thompson 24.5x9x13
-LS Meshies rear
-CCC Racing Street drag wing
-Custom Welded in 6 point cage
-TPR rear diffuser
-rear interior gutted
-LS seats w/ 5 point RCI cam lock
-ARP extended wheel studs
-VX pass mirror delete
-Moroso "push off" rear kill switch


Suspension

-Corner Balanced 65/35 by Turn-in Concepts
-Full-Race Pro Am Traction bar
-Omni Drag coilovers
-Skunk2 12k front 18k rear springs
-Skunk2 front camber kit
-Skunk2 LCA's
-Skunk2 Phi-Fifty lower tie bar
-Energy Suspension bushings
-99 integra rear disc swap




Engine / Drivetrain

-ERL Darton Sleeved 84mm Line Bored/Honed/Balanced B18b1 block
-ERL 5-point main girdle w/ cut and machined main caps
-ARP main studs
-CP Turbo Pistons w/ coated skirts
-CP Piston rings
-Manley Turbo Tuff Rods
-ACL Race/Calico Coated Bearings
-polished LS crank
-ATI Race Damper crank pulley

-BES ported B16 head
-Supertech Ti dual springs
-Supertech valves
-Bronze valve guides
-Crower retainers
-Skunk2 Pro 1 Cams
-OEM Type R LMA's
-Golden Eagle Cam Gears
-Gates Racing Timing Belt
-JG Edelbrock Intake mani
-Port matched 3" Throttle Body
-TPR fuel rail

-GSR transmission
-Quaife LSD
-Speedfactory SCHA
-Synchrotech carbon synchros


-Competition Clutch Twin Disk
-DriveShaftShop 2.9 axles


Turbo Components

-Precision SC6162 re-housed by PureTurbo's
-Precision 46mm Wastegate
-MAC Electronic Boost Solenoid
-SLS T3 Top Mount manifold
-SLS 3" Downpipe
-Tial Q 50mm BOV
-Custom 2.5" / 3" Intercooler piping
-GodSpeed 31"x12"x3" FMIC
-BlueRidge Motorsports battery tray Catch Can
-Taylor Battery box relocation kit
-RC 1000cc Injectors
-Walbro 400 pump



Most recent tuning session as of May 2015 yielded 600whp on DynoJet @ 27 psi on 112 octane race gas. Tuned by Dave Blundell (Blundar) on NeptuneRTP.

DynoJet session Nov 2014- https://www.youtube.com/watch?v=zLJ-zeP1fxY&list=UUV8RIduW1yw6n0WesXbZ72w

4th gear pull, 70-140 mph on fresh tune- https://www.youtube.com/watch?v=0_cF_1ChVoE

2013 DynaPack vid putting down 547whp- http://www.youtube.com/watch?v=LOu-HUJNl6Y&feature=share&list=UUV8RIduW1yw6n0WesXbZ72w

4th Gear pull prior to drag coilovers and traction bar - http://www.youtube.com/watch?v=lN1JuoAnWVU&feature=share&list=UUV8RIduW1yw6n0WesXbZ72w

Image

Image

Image

Image

Image

Image

Image

SUBSCRIBE TO MY YOUTUBE CHANNEL!!!

Image

Image[/URL]

Image

Image


Image

Image
















*****OLD SETUP! AS OF 8/3/13 still running like a champ in a friends hatch exactly as it was!*************



-100% stock internal JDM B18b
-Evo 8 TD05H 16g
-custom twin scroll B Series to Evo header
-Forge Motorsport internal wastegate
-ProSport MBC
-Precision 440cc injectors
-Walbro 255 fuel pump
-Hondata 4 bar map
-3" Downpipe to 3" straight pipe
-Go-Autoworks Intercooler Piping
-Spearco FMIC
-Greddy Type RZ BOV
-TPR catch can kit
-Moroso street/strip oil pan
-Blox oil adapter/sandwich plate
-Treadstone vacuum block
-Neukin radiator w/ slimfan.com
-Hasport mounts w/ U70A bushings

-GSR tranny w/ 98' Spec Type R LSD and 4.785 final drive
-Competition Clutch Stg 2


tuned by Blundar on eCtune making 302wtq / 285whp

SUBSCRIBE TO MY YOUTUBE CHANNEL!!!

on the dyno 11/19
http://youtu.be/U8EujGlh7dM

in-car vs '06 Subaru WRX
http://youtu.be/yxgXEOdj5mo

in-car vs i/h/e k-pro RSX-s
http://youtu.be/oIKzWMHlFi0

on low boost vs bolt on new Camaro SS
http://youtu.be/CSWKRCrd1u4


Image

Image
Image
Image
Image
Image

photoshop'd rear quarter.. bodywork/paint this winter!
Image
Image




full car pics coming as soon as she's all one color :P


old pics..
Image
Image
Image
Image[/url][/url][list=][/list]
Last edited by JUICE on Tue May 05, 2015 9:21 pm, edited 160 times in total.
User avatar
By Dippin_EG
#147566
alldatJUICE wrote:This thread is useless without pics!!! :P



Man, you had me all ready to look at some pics after reading the timeline of the hatch and then you stated the truth.

NOW GET SOME PICS UP!!!!! :lol:
User avatar
By Dippin_EG
#147570 yeah , i didnt post pics for a while cause i didnt have a cam, then mah sis sold me a Kodak easy share for $30 bucks with a cord for the comp. and a memory card, its not that special ,but it gets the job done 8)
User avatar
By Greasedmonkey
#147584 Pics or it didnt happen!!!
User avatar
By EgCruiser
#147639
Greasedmonkey wrote:Pics or it didnt happen!!!


:thumb:
User avatar
By JUICE
#147921 well i put pics on my photobucket but they're all really small???

they're all like this....





]
Last edited by JUICE on Tue Sep 29, 2009 2:14 am, edited 2 times in total.
User avatar
By Ajax1989
#147923 try clicking on the picture it should make it bigger
User avatar
By JUICE
#147925 yes i'm clicking on them. tried postin that one like i do every other pic on here but....

if you put that address in can YOU see the image? i can when i do it so i dont understand why it wont show it on this page??


Chance, help me out here. go into my photobucket!!!
User avatar
By Ajax1989
#147927 i can try t help if you want, how do i get in ur photobucket?
User avatar
By Joplies
#147960 Image
User avatar
By Joplies
#147961 Looks good bro! It may need a lil shine huh? lol. But still it looks good. Especially sittin low on those SI wheels
User avatar
By JUICE
#147977 goin tomorrow to get the title for a shell that is pretty much ready for paint. havent decided if i wanna start a project, or take as much as i can from it and part out the rest. it comes with a set of black meshies, full black interior in boxes. everything is there except engine/tranny and brake lines. still got drums too :thumbdown: