Page 1 of 1

cluster swap (help)

PostPosted: Sun May 20, 2012 2:47 am
by moykaz
I have a honda civic cx94 (D15B8) and I want to change my cluster, because the one I have does not come with a tach... is there another cluster from another civic so I can pu it on to work?

PostPosted: Sun May 20, 2012 3:48 am
by HungRealLow21
a cluster from an lx or ex will do it any cluster from any 92-95 eg will fit and work :thumb:

PostPosted: Sun May 20, 2012 3:58 am
by moykaz
HungRealLow21 wrote:a cluster from an lx or ex will do it any cluster from any 92-95 eg will fit and work :thumb:



thnaks man!! time to go to the junkyard

PostPosted: Sun May 20, 2012 4:09 am
by HungRealLow21
moykaz wrote:
HungRealLow21 wrote:a cluster from an lx or ex will do it any cluster from any 92-95 eg will fit and work :thumb:



thnaks man!! time to go to the junkyard

good luck mn i got one a while back for 10 bucks because the speedo wasnt working so i just changed mine in and voila haha

PostPosted: Sun May 20, 2012 5:15 am
by moykaz
HungRealLow21 wrote:
moykaz wrote:
HungRealLow21 wrote:a cluster from an lx or ex will do it any cluster from any 92-95 eg will fit and work :thumb:



thnaks man!! time to go to the junkyard

good luck mn i got one a while back for 10 bucks because the speedo wasnt working so i just changed mine in and voila haha


xD by the way, it has to be another eg? or simple 92-95 lx-ex to work?

PostPosted: Sun May 20, 2012 3:59 pm
by HungRealLow21
no it can be any 92-95 civic lol

PostPosted: Sun May 20, 2012 5:19 pm
by teal_dx
Just be sure that the donor car has the same transmission as yours or you'll have/not have the "P-R-N-D-1-2" on the cluster.

PostPosted: Mon May 21, 2012 3:16 am
by moykaz
thanks a lot!!

PostPosted: Sat Jun 02, 2012 6:21 am
by Rotary_EG4dr
building on this post, are are the connections there ready to plug in? or do you need to add pins to the harness if you don't have a tach? (i.e. my DX lol)

PostPosted: Sat Jun 02, 2012 6:23 am
by asianrob
Rotary_EG4dr wrote:building on this post, are are the connections there ready to plug in? or do you need to add pins to the harness if you don't have a tach? (i.e. my DX lol)


its all plug and play. you might have extra spots for connectors like Cruise but other than that they just plug in.

PostPosted: Sat Jun 02, 2012 6:26 am
by Rotary_EG4dr
I love building Lego's...... i mean civics... :twisted: :twisted: