Page 1 of 2
MOMO steering wheel problem.
Posted:
Fri Jan 27, 2012 8:40 pmby Stank.EG6.Stay.Nasty
i am planning on buying a MOMO montecarlo steering with the MOMO hub for my ride, i am having a prolem finding what the set screw size is for the steering wheel. it doesnt say it on the website, so if you guys have one or know someone that does can you help me out...
thanks,
STANK!
Posted:
Sat Jan 28, 2012 1:12 amby EJ1_MK
On your factory wheel?
Posted:
Sat Jan 28, 2012 1:24 amby Stank.EG6.Stay.Nasty
EJ1_MK wrote:On your factory wheel?
no its a atermarket wheel with a completely different hub
Posted:
Sat Jan 28, 2012 1:32 amby EJ1_MK
Ok where is the set screw located?
Posted:
Sat Jan 28, 2012 1:41 amby Stank.EG6.Stay.Nasty
EJ1_MK wrote:Ok where is the set screw located?
its for the set screws that attached the steering wheel to the hub made for honda's
Posted:
Sat Jan 28, 2012 5:46 amby EJ1_MK
Can you post a picture I have never seen this before, most hubs that work with aftermarket steering wheels use the nut off the column and the wheel bolts to the hub with 6 allen head screws.
Posted:
Sat Jan 28, 2012 3:37 pmby Stank.EG6.Stay.Nasty
im in afghanistan right now and i ordered it off the website and its getting sent home. so there is absolutely no way of me being able to do this
Posted:
Sat Jan 28, 2012 3:57 pmby EJ1_MK
Oh I see that would be hard so your current steering wheel and hub is generic and your replacing it with a full momo setup. But your old hub has a set screw correct?
Posted:
Sat Jan 28, 2012 4:01 pmby Stank.EG6.Stay.Nasty
well i have a stock steering wheel so i wouldnt know
Posted:
Sun Jan 29, 2012 3:11 amby EJ1_MK
Stank.EG6.Stay.Nasty wrote:well i have a stock steering wheel so i wouldnt know
So you have a stock wheel that you want to replace with a MOMO setup then just want to make sure that I am clear before I proceed with info
Posted:
Sun Jan 29, 2012 3:16 amby EJ1_MK
Are you asking what size the torque screws are for your factory airbag? You have to remove the cruise control there are two regular screws and pop off two covers and there are 4 torque screws or star bit screws.
Posted:
Sun Jan 29, 2012 11:26 amby EG {FIVE-500}
Posted:
Mon Jan 30, 2012 4:35 pmby Stank.EG6.Stay.Nasty
no they are just set screws that mount the steering directly on the hub. there is no airbag on it so i dont need to worry about that. i just need to know the size of the set screws
Posted:
Tue Jan 31, 2012 1:54 amby EJ1_MK
Ok I have never seen a factory steering wheel with set screws, there is that center nut that holds the wheel on that will need go back on to hold the hub in place. I would imagine that a regular screw driver would work if they are just regular Philips head screws. If you could have anyone shoot some pictures and then send them to you so that I can see it that would help a ton to understand what this looks like.
Posted:
Tue Jan 31, 2012 1:57 amby Stank.EG6.Stay.Nasty
i just hope i can find the hardware somewhere convenient...
