Dash Seats, Steering Wheels etc... If it's inside your Civic then it's in here.
By blk97supra
#281491 I have a 97 prelude I'm parting out but I have good seats in it and I wanna putting them in my 93 EG. Anyone know how I am supposed to go about this? Do I just change the rails? Or drill out the rivets that hold the bolt holes? And swap them? What would be the best way to go about it.

Thanks guys.
User avatar
By asianrob
#281712 might be able to swap the rails. i would try that first

if not you might have to mod it like the crx si seats
By blk97supra
#281757
asianrob wrote:might be able to swap the rails. i would try that first

if not you might have to mod it like the crx si seats


Thanks I'll try the rails tomorrow. I'll let u know how it goes.
User avatar
By asianrob
#281902 sounds good. i hope its just as easy as that lol
By blk97supra
#281905 I just bolted 2 bolts n it holds.
User avatar
By teal_dx
#281951
blk97supra wrote:I just bolted 2 bolts n it holds.

Bad idea... if someone rear-ends your car, you're going to wish you used all 4 rail bolts instead of only 2. :thumbdown:
Think about your safety :thumb:
User avatar
By dbrooks
#282126 x2
User avatar
By familyEGuy23
#282128 x3
for the bolts that don't line up just make custom brackets from your rails to the mounting holes probably going to need to weld it. You don't want to go flying out your car if you get in an accident
By blk97supra
#282216 Well its one rear bolt and one front bolt opposite of each other. But might make a custom bracket for the other rear mount hole like Guy23 said cause 3 bolts be better then 2 till I get the racing seats.