Type R seat in my EG?
Posted: Sun May 22, 2011 10:25 amDoes anyone on here know how much modification is needed to get Civic Type R seats out of an EP Type R to fit into my EG? Thanks
Page 1 of 1
Posted: Sun May 22, 2011 10:25 amPosted: Sun May 22, 2011 10:32 amYou need the correct rails and sliders to be able to fit. I believe there are some sites that you can get the correct rails and sliders
Posted: Sun May 22, 2011 10:58 amdc2 type r seats drop straight in no mods required
Posted: Sun May 22, 2011 11:22 amDc2 type r seats drop rite in, but ep type r seats dont. Correct me
If I'm wrong. I think you would also have to bend the rails of the ep seats to fit the eg. If you wanna do it right then get the correct rails.
If I'm wrong. I think you would also have to bend the rails of the ep seats to fit the eg. If you wanna do it right then get the correct rails.
Posted: Mon May 23, 2011 1:05 pmOk thanks, does anyone know where I can get the right rails from? Am in the UK but I'll order from the US if its easier. Thanks 
Posted: Sat May 28, 2011 9:07 pmEP3 seat are shite and sit seriously high in egs, dont waste your time or money. Unless they're ep3 Recaros, which are good seats, but cost mega moey and you'd need DC2 rails to fit them
Type r front and rear seats
Posted: Sat Sep 08, 2012 4:58 pmi have them in my car they bolted up without a problem, they are in my red 95 eg
Posted: Sat Sep 08, 2012 7:17 pmUsdm type R 
Re: Type r front and rear seats
Posted: Sat Sep 08, 2012 8:23 pmDemspey1995EG wrote:i have them in my car they bolted up without a problem, they are in my red 95 eg
nice!!!!
but he wants ep3 civic not integra seats in