A quick google search will give you an answer, but I've written a DIY for this and have the answers and am feeling nice tonight. so:
Cluster- 6-7 (depending on cluster) T1.5 instrument cluster bulbs, these have the base already so its a direct swap (check polarity) or you can use #74 wedge and reuse the OE bases.
Climate Control- 2 #74 wedge
Switches- There are 2 per switch, you do the math depends on which switches you have. One for the backlight and one for the "ON" light. Then there is one in the hazard switch (red). Not many people know there one in there because its burned out. Those are T3 NEO wedge base.
It would be smarter to get halogen bulbs. I ended up swapping my LED's back to halogen because the light output is better. Plus the halogen bulbs are cheaper and are probably going to last well past the expected life of the car from here on out.
You can buy them all LED/halogen from
Autolumination