- Thu Apr 21, 2011 7:22 am
#251500
mooze wrote:think the biggest prob would b getting the digi speedo to work
x2
Unless you do a K/J Series swap you will have a heck of a time to get your speedometer to work. They do make conversion boxes for the S2000 instroment cluster that converts from the new single to the old single output for speed. That goes as well for engine temperature.
Short of those it wont be hard to do. Find the Wiring diagram for a 92-95 Civic instroment cluster, that will be easy as their are multiple online for doing DC, EK, etc cluster swaps. Then you get the wiring diagram for a RSX. Honda Hookup has helms manuals with very very good wiring sections in them. Make a chart of what wires go to what and then either make a plug and play harness(recommend) or rewire your eg to take the RSX Plugs.
By far the easiest part of this swap will be making the instrument cluster fit into the dash.
This wont be a cheap swap especally due to havign to convert the newer K/J Series speed/heat singles from the older d/b/h speed/heat singles
WILL Require a Conversion box (total speed needs to be reduced by X value, need a semicondoctor to do it).
It will be alot of hassle imo. Going with a 97-01 Prelude cluster swap seams like a better route for a similar look IMO.
This route has been done before and the homework of which wires to repin has been done. You just have to search to find them. (pssh its the result in google thats hosted on honda-tech)