Page 4 of 6
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Thu Mar 22, 2012 10:24 pm
by andyc
Why have the lever further away from you? I would have thought you'd want a rhd one if you need it passenger side but don't know 100%. Can't imagine Honda would make them passenger side though?
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Thu Mar 22, 2012 10:41 pm
by Hatch-O-Doom
I think I might wanna do this... this is pretty sick! what are the measurements to the pices of metal I have to get?
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Thu Mar 22, 2012 10:54 pm
by andyc
I had bits lying around you don't have to be exact really... I just used strips 2-3mm thick and fabbed up what I needed with a hammer and drill it was pretty easy just a lot of fettling required for a decent fit it's NOT just bolt down. You need to cut plastics and shape it to make it look good. I removed mine today funnily enough as I have a fair bit more to do to mine
![Sad :(](./images/smilies/frown.gif)
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Thu Mar 22, 2012 10:58 pm
by 95cpeEX
well i want the ebrake shifter on the passenger side cuz it tends to get in my way when its on the left of the console...and it just looks better on the right side of the console
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Thu Mar 22, 2012 11:18 pm
by andyc
fair enough, just wandered
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Fri Mar 23, 2012 8:46 am
by GhettoSmurf
UAU!
![Image](http://www.desismileys.com/smileys/desismileys_4575.gif)
My next DIY!
![Smile :)](./images/smilies/smile.gif)
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Fri Jul 06, 2012 8:51 pm
by Laziz
This should look realy awesome in my car =)
Did you use the tunnel from AT or MT Prelude?
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Tue Jul 17, 2012 4:25 pm
by 1992HondaCivicHatchDX
Can someone please answer a question. The last photo, is of a prelude with an LCD screen. Behind the main console, as far as I knew, the ebrake was sorta beside the shifter in a really awkward position. Why does that prelude have a nice ebrake console? Is it from the prelude? or what car?
thanks
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Thu Jul 19, 2012 1:09 am
by DontHateonEG8
92-93 preludes had their e-brake lever in the middle.
94-96 preludes had their e-brake offset to left or right depending on your market
I personally like the offset because it gives you a cup holder and you have a place for stereo or accessories
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Sat Jul 21, 2012 1:08 am
by cjw_89
i justed picked one up from a 93 up model i belive the hp4 one no armrest tho:(
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Fri Jul 27, 2012 3:23 pm
by 1992HondaCivicHatchDX
just got myself the HP4 from a 93 (no armrest) but being as the ebrake lever is at the back , I dont need to weld on plates and such as he had to do. Im fitting it right now and will post pics up later.
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Fri Aug 10, 2012 10:23 pm
by 94civic
just picked up a center console from a 94 prelude! gonna give this a shot! thanks for the diy very very helpful!
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Wed Jun 26, 2013 5:34 pm
by 92hatch
Hey can you repost the pics? they are missing now
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Thu Aug 29, 2013 6:25 pm
by mikotj
can i do this on a sedan?
![Post Post](./styles/FLATBOOTS/imageset/icon_post_target.gif)
Posted:
Sat Sep 14, 2013 8:27 am
by DontHateonEG8
I have all of the parts from the prelude for the conversion.
PM me if interested
![Smile :)](./images/smilies/smile.gif)