Page 3 of 6

PostPosted: Sun Feb 26, 2012 6:28 pm
by andyc
no that connector is much smaller... I think this could be in the coupe, there is a button around there for the ariel, so that it only comes out half or full depending on when the button is pushed?

PostPosted: Sun Feb 26, 2012 7:36 pm
by k_asars
I think it is for headlight adjusment.

PostPosted: Wed Feb 29, 2012 1:26 pm
by shaqwave
Now i know whats next DIY to do :)

PostPosted: Wed Feb 29, 2012 2:41 pm
by andyc
yeah! this is mine :)

Image

PostPosted: Thu Mar 22, 2012 10:20 pm
by 95cpeEX
im looking to do this swap to my car, but im having trouble finding the console located in the DIY pictures...all the ones im finding are with the ebrake lever on the drivers side. i want one with the ebrake lever on the passenger side of the console...

would this mean i would have to find a RHD prelude center console? are am i looking at the wrong years? cuz this is the link to one i found and was gonna pick up till i noticed which side the ebrake lever is on

http://seattle.craigslist.org/see/pts/2899092762.html

PostPosted: Thu Mar 22, 2012 10:24 pm
by andyc
Why have the lever further away from you? I would have thought you'd want a rhd one if you need it passenger side but don't know 100%. Can't imagine Honda would make them passenger side though?

PostPosted: Thu Mar 22, 2012 10:41 pm
by Hatch-O-Doom
I think I might wanna do this... this is pretty sick! what are the measurements to the pices of metal I have to get?

PostPosted: Thu Mar 22, 2012 10:54 pm
by andyc
I had bits lying around you don't have to be exact really... I just used strips 2-3mm thick and fabbed up what I needed with a hammer and drill it was pretty easy just a lot of fettling required for a decent fit it's NOT just bolt down. You need to cut plastics and shape it to make it look good. I removed mine today funnily enough as I have a fair bit more to do to mine :(

PostPosted: Thu Mar 22, 2012 10:58 pm
by 95cpeEX
well i want the ebrake shifter on the passenger side cuz it tends to get in my way when its on the left of the console...and it just looks better on the right side of the console

PostPosted: Thu Mar 22, 2012 11:18 pm
by andyc
fair enough, just wandered

PostPosted: Fri Mar 23, 2012 8:46 am
by GhettoSmurf
UAU! Image My next DIY! :)

PostPosted: Fri Jul 06, 2012 8:51 pm
by Laziz
This should look realy awesome in my car =)
Did you use the tunnel from AT or MT Prelude?

PostPosted: Tue Jul 17, 2012 4:25 pm
by 1992HondaCivicHatchDX
Can someone please answer a question. The last photo, is of a prelude with an LCD screen. Behind the main console, as far as I knew, the ebrake was sorta beside the shifter in a really awkward position. Why does that prelude have a nice ebrake console? Is it from the prelude? or what car?

thanks

PostPosted: Thu Jul 19, 2012 1:09 am
by DontHateonEG8
92-93 preludes had their e-brake lever in the middle.
94-96 preludes had their e-brake offset to left or right depending on your market

I personally like the offset because it gives you a cup holder and you have a place for stereo or accessories

PostPosted: Sat Jul 21, 2012 1:08 am
by cjw_89
i justed picked one up from a 93 up model i belive the hp4 one no armrest tho:(