Page 1 of 1

steering wheel quest....

PostPosted: Mon Jun 28, 2010 10:55 pm
by EJ1STYLEN
can anybody tell me does our eg have 6 bolt for the steering wheel?...cuz im about to buy a 320mm steering wheel...so i just want to know if ill fit....and is there a DIY on installing a aftermarket steering wheel....

PostPosted: Tue Jun 29, 2010 2:46 am
by asianrob
you will need a hub for your steering wheel.

PostPosted: Tue Jun 29, 2010 6:09 pm
by EJ1STYLEN
yea i know that part, but i want to know is it a 6 bolt?...so yea anybody else..

PostPosted: Wed Jun 30, 2010 1:09 am
by tmoney
the hub is specific to your vehicle on one end and will have a 6 bolt pattern to match your steering wheel on the other end

PostPosted: Fri Oct 01, 2010 3:21 am
by BlueVic_8354
if the hud is universal, it would have center bolt for the spline and about 18 bolts on the other end to fit various 6-bolt pattern steering wheel...

PostPosted: Fri Oct 01, 2010 5:43 pm
by asianrob
EJ1STYLEN wrote:yea i know that part, but i want to know is it a 6 bolt?...so yea anybody else..



are you asking how many bolts the steering wheel will have ?

like on my steering wheel set up i have the Nardi steering wheel with the NRG hub.

my steering wheel has 6 bolts to bolt it down. the NRG hub i have is 6 bolt hub.

if you have a 5 Bolt steering wheel you will need a 5 bolt hub which Momo makes and im pretty sure NRG makes too.

stock steering wheel only has 1 - 19mm bolt holding down the wheel.

hope that clears up any confusion