Civic-EG.com Forum 3.3.1

- Mon Mar 08, 2010 5:25 am #179801 ok so i put in the power door conversion into my hatch and everything works hooray for that but......

seems like everything is sluggish.... not sure if everyones is like that or if motors are just old

and also another ? is


WHERE does the stupid door lock button attach??? lol i have the button but not the trim around it so the only thing i can assume is that it mounts on the trim piece that im missing....

if anyone needs pix ill post tmro!

#1 Member of CHANCE is HOMO club:thumb:

1994 civic dx hatch-sold
1992 civic dx sedan-sold
2001 ap1 s2000 -daily

- Mon Mar 08, 2010 6:48 am #179821

hope this helps...switch right above the inner door handle and lock

- Mon Mar 08, 2010 1:43 pm #179850 yeah but there's a bracket that the switch i mounted to .... but how does it mount on the door?


im assuming the plastic trim piece that goes around it makes it mount onto the door?!?!?!?

#1 Member of CHANCE is HOMO club:thumb:

1994 civic dx hatch-sold
1992 civic dx sedan-sold
2001 ap1 s2000 -daily

- Mon Mar 08, 2010 2:47 pm #179867 i believe it is a press fit but i would have to pull the panel to be sure

- Mon Mar 08, 2010 10:27 pm #179988 nah to much trouble for somthing simple and



anyone got an idea why they slow or are they just that way?

#1 Member of CHANCE is HOMO club:thumb:

1994 civic dx hatch-sold
1992 civic dx sedan-sold
2001 ap1 s2000 -daily

- Tue Mar 09, 2010 7:31 am #180071 Lithium grease on the glass tracks should make them slide nicely.

The lock sw. mounts on the trim/bezel (there's a hook and a screw IIRC) About $10 from Honda.