Civic-EG.com Forum 3.3.1

- Tue Aug 23, 2011 6:56 pm #268606 Hello lads,

I need some valve stem seals and got quoted 33 quid. Which I thought was a little steep? Has anyone else managed to get any cheaper or know if any of the other civic heads use the same valve stem seals as my eg3 (d13b2).

Man thabjs

- Tue Aug 23, 2011 11:20 pm #268648 Hello mate,

I know it's always a bit iffy, but check Ebay.

Found these:
http://www.ebay.co.uk/itm/Viton-Valve-S ... 2566cc6ee1

they're for "All D-series", and I believe most D-series parts are interchangable [I'm running a D16 Skunk2 manifold on my D15 for instance].
They don't say they fit the D13b2 on the list so your best bet is to give them a call and see if they can confirm they'd fit?

if you don't mind me asking - what's your problem with the car, as I believe I might need to replace my Valve stem seals as well

http://civic-eg.com/viewtopic.php?t=13235

- Sat Aug 27, 2011 9:54 am #269238 Ah cheers, think I may go for them.

My problem weren't with the valves or valve stem seals, mine were sealed really well, had done a compression test.

I went with a budget head gasket and it died after like 2 - 3 months, so as I'm getting the head skimmed needed to replace the seals. What's up with yours then?