General tranny info covering all models & motors.
By Yahya
#107059 How do I remove the passengers side axle? (CV halfshaft)
When I tried to remove it, I managed to remove the steel strip that holds the boot on the inner joint, but I cant get the end out of the transmission D: D:

And, does anyone know how many teeth it has on the transmission side?


It's a EG4 with D15B2 (S20 tranny?)
User avatar
By boosted94
#107088 Asuming you've never done this before. theres no need of removing the boot.
simply insert a pry bar/big flat screw driver between the trans case and the "cup" and pry the cup outwards(towards wheel NOT fire wall)some times it takes a little playing but will pop right out.
hope this helps
User avatar
By chrono404
#107202
boosted94 wrote:Asuming you've never done this before. theres no need of removing the boot.
simply insert a pry bar/big flat screw driver between the trans case and the "cup" and pry the cup outwards(towards wheel NOT fire wall)some times it takes a little playing but will pop right out.
hope this helps


x2

You also need to have the suspension parts taken apart so you can pull the axle out. :thumb: