Civic-EG.com Forum 3.3.1

- Mon Mar 24, 2008 5:57 pm #47538 i know this is not a eg question, but i need help with it

My friend has an older model (92 or 93 I believe) Nissan Sentra SER that he says he put a G20 transmission in. The problem he says is that the axles that came with the trans do not fit and he wants to know how he can get them modified to fit (what kind of shop could do this) or where he can buy some pre modified. Any help would be great thanks.

- Mon Mar 24, 2008 7:01 pm #47541 should fit i dont see what the difference is between the tranny's since they come on the same motor unless they are comepletely different

driveshaft.com

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Thu Aug 14, 2008 6:26 pm #65976 phone up a autoparts store. compare the size and number of splines with the inner CV joint. I know on one of my mates scooby's we did that and worked perfectly. but not 100% sure it will work in your case. GL