General tranny info covering all models & motors.
User avatar
By madhatchride
#316239 ok im swapping transmissions on two motors the motor im putting my current straight drive motor on was originally a automatic and has a diffirent plate on the motor when i pulled the transmission of the motor thats blew up the clutch stayed with it what will i need to do to swap the straight drive clutch and everything onto the new motor that had the auto tranny on it
User avatar
By teal_dx
#316240 If new motor was auto, remove the auto flexplate first. Then you will need the pilot bearing, flywheel, flywheel bolts, clutch/pressure plate & bolts and release bearing.
User avatar
By madhatchride
#316278 thanks that worked perfect everything went back together smoothly