Civic EG

Posted: **Fri Apr 02, 2010 11:13 pm**

ok so i need to replace my cmc but i want to know what one is better the stock eg civic cmc or a itr cmc

Posted: **Fri Apr 02, 2010 11:32 pm**

well your stock EG is a d-series... and an ITR is a b-series. I could be totally wrong but i dont think they're the same.

Posted: **Sat Apr 03, 2010 12:25 am**

I have a b16 so... They kinda look the same i just need to know if i can use a itr cmc and if its better than stock

Posted: **Sat Apr 03, 2010 12:36 am**

in that case, they're most likely EXACTLY the same. the ITR probably even has the same part #...

Posted: **Sat Apr 03, 2010 12:40 am**

no different part number the only thing i can think of is different bore size, bolt size, or threded line size

Posted: **Sat Apr 03, 2010 12:50 am**

just get the B16 one, i doubt there's any difference. are they the same price?

Posted: **Sat Apr 03, 2010 12:53 am**

thats is the weird thing the itr cmc is cheaper than the stock by $8 but im going to check the 99 si cmc on the part #

Posted: **Sat Apr 03, 2010 12:55 am**

the 99 si and the eg has the same part # so i dont know

im kinda lost on the itr cmc

Posted: **Mon Apr 05, 2010 5:37 pm**

Do any body know if there is a differents between the two

Posted: **Mon Apr 05, 2010 5:45 pm**

i dont see where there would be any differnce as far as performance... call an auto parts store and see if the pn's are the same ? :thumb:

Posted: **Mon Apr 05, 2010 10:18 pm**

There not, they have different pn the only thing i can think of is different bore size and length of the rod that attaches to the clutch pedal

Posted: **Mon Apr 05, 2010 10:19 pm**

There not, they have different pn the only thing i can think of is different bore size and length of the rod that attaches to the clutch pedal

clutch master cylinder