Civic-EG.com Forum 3.3.1

- Fri Oct 09, 2009 4:06 pm #149848 I just bought a 93 Hatch and It needs the shifter linkage replaced. I have the Linkage I just was wondering what the best way to replace it was. Any help is greatly appreciated.

- Fri Oct 09, 2009 4:20 pm #149851 ummm really all you do is unbolt it and i think its a 1/4in punch for the bitch pin the should probaly be your first task is hammering that thing out.

but its pretty straight forward just make sure to take your time....

1980 volvo 242
2001 crv
not using punctuation or good sentence structure since day 1

[teal_dx]

- Fri Oct 09, 2009 6:21 pm #149870 I think it was an #8 punch that fit the bitch pin perfectly... but look around the garage, anything the right size should do.

Here's a link for installing the linkage on a CVT equipped HX.
http://6thgearadvertising.com/civic-hx/ ... nkage.html

The only difference is that in the first few pics where I had to drill out the spot welds to remove that panel below the auto shifter, you can ignore that step because EG's don't have that extra plate to remove.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Fri Oct 09, 2009 7:10 pm #149875 the bitch pin....... prayer is the only way.

single slammer = one cam of fury.


si = supercharger inside

- Fri Oct 09, 2009 8:46 pm #149887

the bitch pin....... prayer is the only way.

agreed, i've had to cut linkage off because of that fucking thing.

::: 1992 Civic Si ::: 1992 Integra GS-R :::
GREDDY EVO 2 FTMFW #2 ..... >100,000 mile club!

- Fri Oct 09, 2009 11:50 pm #149908 think we used like 6mm punch and a big hammer. took a couple swings.

- Sun Oct 11, 2009 1:37 am #149974 Ok thanks guys for the help...I was worried about the bitch pin too.

- Fri Nov 13, 2009 7:30 pm #156430

Ok thanks guys for the help...I was worried about the bitch pin too.

i found a craftsman 1/4" extension is the PERFECT size to beat that bitch outta there

but i'm assuming you already got it out by now...

SiLo's 99 EX Sedan build

[Almost R.I.P.]My EJ1 Turbo SOHC Build - 234whp 212wtq

- Sun Nov 22, 2009 4:28 am #157758 yea got all that done....didnt fix my problem?

- Sun Nov 22, 2009 5:26 am #157768 whats the problem? need more info to help ya

1980 volvo 242
2001 crv
not using punctuation or good sentence structure since day 1

- Sun Nov 22, 2009 9:07 pm #157857 yeah...need a bit more info, why did you replace the shifter linkage?

SiLo's 99 EX Sedan build

[Almost R.I.P.]My EJ1 Turbo SOHC Build - 234whp 212wtq