Shifter question??.... (bushing??)

General tranny info covering all models & motors.
 Reply
User avatar

Shifter question??.... (bushing??)

By Lowkei
- Thu Jul 02, 2009 12:57 pm #127674 Hey guys this is kind of me generalizing that fact that I've done it on some other cars, but does my 92 have any way to tighten up the shifter and/or shifting. I notice there is a lot of play in the shifter, normally I would replace the bushings with solid bushings( that I would make) or replace with OE stuff.

And should I leave the shifter stock or upgrade to a B&M shifter or something of the same sort. :?
User avatar

By teal_dx
- Thu Jul 02, 2009 1:00 pm #127675 a B&M etc will goive you a shorter throw if that's what you want. Just stay away from cheap ebay shifters - they break.

Replacing the bushing will tighten it up, I recommend a urethane replacement :thumb:
User avatar

By Lowkei
- Thu Jul 02, 2009 1:16 pm #127679 Awesome I will tear that down tonight and get some to work on milling out some bushings.

Yea I would like a shorter throw so... I will be getting one of those for sure.
User avatar

By matt is (eg6)
- Thu Jul 02, 2009 6:14 pm #127795 i have a skunk2 dual bend and it is the shit!!!
User avatar

By Sentry
- Tue Jul 21, 2009 6:20 am #131969 I did the energy suspension ones and they didn't do jack to take the slop out. Made actual shifting nicer though.

I just bought these:
http://cgi.ebay.ca/ws/eBayISAPI.dll?Vie ... SA:CA:1123

They all go at the bottom of the shift rod. They should sort it out. :D
 Reply
Return to Transmission