thin head gasket?

N/A build discussion
 Reply
User avatar

thin head gasket?

By mistergou
- Sat Apr 18, 2009 1:52 am #111379 Hey guys was wondering what the best thickness would be for an all motor build, have seen all kinds of sizes an brands an just wanted to get the most bang for my buck, thanks.
User avatar

By mistergou
- Tue Apr 21, 2009 2:14 pm #112109 I know some one has used one of these, any input would be great
User avatar

By teal_dx
- Tue Apr 21, 2009 4:29 pm #112146 So you are aiming for highest compression? The thinnest HG will get you there.
Personally, I like the OEM Headgasket. It is MLS, multi layer steel. Stay away from paper ones.
Some people use copper ones such as Cometic, for big builds but I have no experience with these.
User avatar

By Greasedmonkey
- Wed Apr 22, 2009 3:42 am #112336 Cometic uses an mls set up like stock as well. use one that is slightly thinner than stock, to just up the CR by a lil. you can also use flat valves for more cr
User avatar

By mistergou
- Fri Apr 24, 2009 10:57 pm #113087 okay thanks guys for the input
 Reply
Return to Naturally Aspirated