Page 1 of 1
What should I expect?
Posted:
Sun Jun 09, 2013 8:32 pmby ottofalcon
Hey!
I'm in the middle of a b18b1 rebuild and swap right now I have a b18b1 with p30 pistons, b20 cams, b18b1 head ported and polished, 4-1 long header and an intake.
Obviously i'm having this tuned, what sort of power and torque should I expect from this setup?
Thank you!
Posted:
Sun Jun 09, 2013 11:48 pmby JUICE
Not gonna put down anything crazy but it should run pretty good. I've always wondered what kind I a power an essentially stock LS puts down with a little tuning. Keep us updated on what it does make
Posted:
Tue Jun 18, 2013 10:57 amby Fada Blayne
You should be putting down around 140-155whp(speculating). I know a guy that has a stock b20 with a 4.7fd ITR tranny doing 139whp. So with ur mods u should be around the numbers i said originally.
Posted:
Wed Jul 17, 2013 12:41 amby ottofalcon
Ok, well when I get it all tuned and ready to go I'll give you guys the official numbers!
Thank you
Posted:
Mon Jul 29, 2013 1:05 amby Greasedmonkey
The b20 cams I had were smaller than the LS cams... You might want to check them to make sure you dont have the puny b20 cams.
Posted:
Mon Jul 29, 2013 5:03 amby kutthroatkrow
My guesstimate with you being in PR is you should expect around 147 crank and 125 wheel.
Posted:
Tue Jul 30, 2013 11:02 amby Fada Blayne
what were the results?
Posted:
Thu Sep 05, 2013 2:38 pmby ottofalcon
I havent finished the car yet, with school and work I'm short on time. When I get it dynoed yet. But when I do I'll post the results and some video.