N/A build discussion
By wolfman93
#331054 Im going to build a minime but not sure of pistons. Which pistons should I go with? I want high compression and im using d15b7 block and d16z6 head. Going to build from ground up.
User avatar
By nicksdelslow
#331227 Depends how high of compression u want. Is the car a daily or track car. And available octane grade makes a little difference also.

Look at zealautowerks.net select D series and play with ur options will give u a good idea of where to start.
By wolfman93
#331246 Daily driver n occasional road course racing
User avatar
By Ajax1989
#331250 iirc its the pistons outta the dohc zc
User avatar
By nicksdelslow
#331253 The zc pistons will will put u around 10.5:1. If u were tobuse this set up u could deck the block or mill the head a combined .020 and still stay around 11:1 with nearly .05 piston to deck height. See below link just enter ur info and calculate until u get a set up u like.

http://zealautowerks.com/dseries.html