Page 1 of 2
What head gasket to use?
Posted:
Mon Mar 05, 2012 2:29 pmby PhantomEJ1
Okay so on my d16 n/a build I need to know what head gasket to get. I already bought a Cometic one and everyone says its junk. Will a Honda oem work with high compression? Give me your opinion.
Posted:
Mon Mar 05, 2012 4:02 pmby Fada Blayne
oem will work with your high compression no problem.
how high you going?
Posted:
Mon Mar 05, 2012 4:08 pmby PhantomEJ1
Well I put JE 10.5:1 pistons in. Decked the block and milled the head so it probably be somewhere around 11.
Posted:
Mon Mar 05, 2012 4:58 pmby Fada Blayne
oem is fine
Posted:
Mon Mar 05, 2012 7:48 pmby bigpunn421
go with a oem gasket and pick up some copper gasket spray. i have seen 700whp personally on a honda with oem gasket and copper spray
Posted:
Wed Mar 14, 2012 7:44 amby bks84
i dont use copper spray on my gaskets, i just use a lil RTV (or as all the fanboys call it: hondabond) on all the oil drain passages...
Posted:
Wed Mar 14, 2012 1:12 pmby teal_dx
I've never used hondabond on a head gasket (just about everything else though) but have had success with copper spray on my OEM HG after I had one start to leak a little on the same setup. (replacing the HG with a new one of course)
Posted:
Fri Mar 16, 2012 3:24 amby PhantomEJ1
I went to Honda and they can't find a part number for one that is 75.5(.020 overbore), all they could find was the std. 75.0 mm bore gasket. So.....
Posted:
Fri Mar 16, 2012 12:46 pmby teal_dx
Just use the OEM stock one. If your pistons are going to go all the way into your head gasket, you've got bigger problems
I have .020 overbore on my z6 and I've been rocking the stock HG fine
Posted:
Sat Mar 17, 2012 4:56 pmby bigpunn421
bks84 wrote:i dont use copper spray on my gaskets, i just use a lil RTV (or as all the fanboys call it: hondabond) on all the oil drain passages...
wow mods delete this guys post. do you want the fourm filled with misleading info?
Posted:
Sat Mar 17, 2012 11:14 pmby bks84
How is it misleading, please... please... please inform me.
I've never ever used copper spray on any of the headgaasket jobs I've done on a Honda. So please tell me how I've misinformed ANYONE on here. Please.
Posted:
Sat Mar 17, 2012 11:30 pmby EJ1_MK
bks84 wrote:How is it misleading, please... please... please inform me.
I've never ever used copper spray on any of the headgaasket jobs I've done on a Honda. So please tell me how I've misinformed ANYONE on here. Please.
agreed seems as if the person calling out people needs to look at his own posts and realize you don't always know what your talking about.
Posted:
Sun Mar 18, 2012 12:03 amby teal_dx
bigpunn421 wrote:bks84 wrote:i dont use copper spray on my gaskets, i just use a lil RTV (or as all the fanboys call it: hondabond) on all the oil drain passages...
wow mods delete this guys post. do you want the fourm filled with misleading info?
If you're going to call someone out on their methods, do us a favor and say why you disagree and what you would do so we can keep the discussion informative
Posted:
Sun Mar 18, 2012 8:26 pmby bks84
Problem is... he can't.
Posted:
Sun Mar 18, 2012 9:34 pmby rtegra92
If you look at ENDYN energy dynamics , larry puts hondabond on the oil passages of his own civic,
http://www.theoldone.com/articles/Larry ... _Civic.htm
these guys are top notch, and know what they're doing.
they were messing with honda engines since 1989.
i trust their methods.