N/A build discussion
User avatar
By boxcarracer0260
#24569 i am in the process of getting the items together to build a b20 setup in my hatch but i have a question about the distributor. Since i am going to keep the OBDI ecu setup (P75) from an OBDI LS do i need to get the corresponding distributor? Everything else from there is cake. I did want to know what everyone thinks of AVID motor mounts and HASPORT motor mounts?
User avatar
By -EJ1- COUPE
#24586 i would go hasports but thats just my opinion
User avatar
By Greasedmonkey
#24644 you will need the OBD1 LS distributor. I would go withe AVID mounts, I ve got a few friend running them and they all love them. They are also cheaper than HASports.
User avatar
By 89ssgti
#24953 you can use the b20b distributor.You just need to change the connector to fit on the obd 1 harness.And for the mounts,why not just use the integra mounts?
User avatar
By thakid22
#25959 just use the 94-95 LS mounts and distributor. that is what i did with my hatch and it works nice
User avatar
By Ej2-B16a
#27927 hassport mounts ftw! :woot:
User avatar
By asianrob
#27965 you can use STOCK mounts with ES inserts and it wont be as stiff as aftermarkt you know... just dont get any solid mounts they vibrate the shit out of your car