N/A build discussion
By AutoXCivic
#218112
Greasedmonkey wrote:you should actually get the 404s. Much better cam. You can through the 404s on a Stock B20z with the 9.6 CR and be just fine. Ive seen someone put them in a B20b block with a p8r head and still make 140whp. Thats only like 8.5:1.


Listen to this guy, sounds like he's more knowledgeable than I am. I did see one dyno where someone used the 404s at stock compression and had decent results. I haven't looked into B-series stuff in a while so my knowledge is a little rusty and deteriorated.

Now I really am itching to try this build out.
User avatar
By Greasedmonkey
#218116 I will be putting 404s in mine. Since I do have the P8r head my CR is a bit lower than the 9.6 the b20z has stock.