Civic-EG.com Forum 3.3.1

- Mon Jul 05, 2010 4:39 am #203195 Im doing n/a with my d series, an i was wondering if my stock rods could handle it? My buddy says they can but i wanna be safe.

- Mon Jul 05, 2010 3:32 pm #203231 stock d16 rods can handle more power than a N/A d-sereies is capable of.
d15 rods are thinner but still strong enough (and lighter).

street machines > dyno queens
z6 turbo power FTW tuned on crome

- Mon Jul 05, 2010 4:44 pm #203237

stock d16 rods can handle more power than a N/A d-sereies is capable of.
d15 rods are thinner but still strong enough (and lighter).

x2 but if you want to be safe just grab some slightly used ls rods and put them in cheaper solution but yea the stock d sereis rods will handle thepower youd be making with the n/a

1980 volvo 242
2001 crv
not using punctuation or good sentence structure since day 1

- Mon Jul 05, 2010 5:20 pm #203246 Ok sweet. Thanks you guys.

- Mon Jul 05, 2010 8:57 pm #203285 i'm pretty sure you can use D16A rods they are far stronger than z6 or y8 rods.

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Sun Oct 24, 2010 2:13 pm #219725 sure you can use the d16a rods..but change the connecting rod bolts to a aftermarket one..like arp connecting rod bolts..

Sl@sh's Research and Development
Tropang EG
BRODETH Motorsports and Fabrications
Pepi Tuning
H3autoworks
my project 94 eg hatch
http://civic-eg.com/viewtopic.php?t=17588

- Mon Oct 25, 2010 1:45 am #219816

sure you can use the d16a rods..but change the connecting rod bolts to a aftermarket one..like arp connecting rod bolts..

x2 ARP rod bolts ftw!

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300