N/A build discussion
User avatar
By Bobec
#189827 Hi,
My friend has a 16a6/z6 mini-me. We looked at the d-series compression calculator and discovered, that the d17 crank would be an intresting choise. With d15b7 pistons and connecting rods it should make a nice compression 11.25:1 and because the d17 has a longer stroke, it should make more torque than the d16 crank...
So my question is, will the d17 crank fit nicely and with no problems in our d16 block :?
By j0keefe21
#189830 i believe you would have to use the d17 rods too but im not positive
User avatar
By Bobec
#189835 thought of that, but then we would have to use z6 pistons and the compression would still be 11.66:1 and that`s a bit too high. This car is a daily driven, so it has to be close to 11... 8)
User avatar
By Bobec
#189839 And one more problem, will the d16 flywheel fit on the d17 crank? :?