N/A build discussion
By littledelsol
#437 I am doing an All Motor Build and wanted your opinion on if I should Resleeve my block and bore out to a 2.0 liter or Get the Darton MID Sleeves installed. I am looking to make a bullet proof engine,I will be running 13:1+ compression on a LS/Vtec that makes about 240whp. Engine will be for weekend/autocross.
I am pretty sure that the Darton MID kit is more for turbo engines but if it will help my car then I am interested.
By sleepincivic
#1188 i would go with the resleeve with that motor being around peak RPM's you'll need the strength and plus you couldnt bore a b18 to a 2.0 unless you got a 92 or 95mm crank .. keeping the stock bore.. but.. to anser your question.. i would resleeve.. theres always room for insurance.