Page 1 of 2

what header to buy?

PostPosted: Thu Nov 12, 2009 10:00 pm
by EgCruiser
want to buy a header for mine d15b2

Got a big exhaust in the rear and a green air box filter

dont want to buy shit that gives less power than the orginal parts
cos i bought a Decat pipe. put it on my car , and the civic lost lots of power from low revs .
:x
soo I want some info from one of you Honda pro¨s

:thumb:

PostPosted: Thu Nov 12, 2009 11:03 pm
by JUICE
thats a 92hp motor @ the flywheel... should just save for a swap or put a little boost to it :hehe:

PostPosted: Thu Nov 12, 2009 11:54 pm
by Dippin_EG
agreed, get that little POS out of there and get a quicker motor 8)

PostPosted: Fri Nov 13, 2009 6:10 am
by robster
Quit the hate!! D15's can be realy quick!

D16z6 MiniMe+z6/y8 header+collector mod and your good to go!

PostPosted: Fri Nov 13, 2009 6:45 am
by chrono404
robster wrote:Quit the hate!! D15's can be realy quick!

D16z6 MiniMe+z6/y8 header+collector mod and your good to go!

none of those parts are off of a d15b2, Unless you mean to reuse its block with a d16z6 head.

Even then, Its a engine tear down and rebuild. A engine swap to a D16z6 or JDM D15b VTEC would be easier.

PostPosted: Fri Nov 13, 2009 7:03 am
by robster
Yes, reuse the D15 block. Just replace the head by a D16z6 minime and you will gain some power! You don't even have to take out the engine. If he uses a well tuned ECU he can easy hit the +130hp mark and the engine still looks stock.

PostPosted: Fri Nov 13, 2009 9:54 am
by xNETZx
a d15b2 can be really fast do not underestimate it!
a d15 with ported an polished vtec head ,4-2-1 headers,frankenstein gearbox and some ecu upgrades over here in Bulgaria runs 14.3 8)

PostPosted: Mon Nov 16, 2009 6:19 am
by Greasedmonkey
Bisi moto header.

/thread

PostPosted: Fri Nov 20, 2009 6:12 pm
by Punksz6
Bisi V2 Header FTMFW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :woot:

PostPosted: Fri Nov 20, 2009 6:21 pm
by Punksz6
Image

Image

PostPosted: Fri Nov 20, 2009 6:25 pm
by ohDirka
convert it to a mpfi then throw a z6 head on it...cheaper and you'll get more power than you would out of a header..I did the mpfi conversion on my crx it took about an hour to do.

PostPosted: Thu Dec 03, 2009 8:31 am
by redridinhood
Punksz6 wrote:Bisi V2 Header FTMFW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :woot:


x 100000000000000000. thread end

PostPosted: Fri Dec 04, 2009 5:37 am
by Greasedmonkey
i have a z6 head you can buy!!

PostPosted: Fri Dec 04, 2009 8:00 pm
by 92egdxhatch
Greasedmonkey wrote:i have a z6 head you can buy!!


i doubt you would want to ship to norway. dont mean to thread jack, but im interested

PostPosted: Fri Dec 11, 2009 1:55 am
by justin_bisimoto
redridinhood wrote:
Punksz6 wrote:Bisi V2 Header FTMFW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :woot:


x 100000000000000000. thread end


Haha you guys are funny.

Really though, A Bisimoto V2 Header would be a great addition to your motor. We have seen gains of 12-18hp over stock exhaust manifolds on pretty much stock motors :thumb: