Page 1 of 1

what pistons should i put on my stock d15b7 engine

PostPosted: Wed Sep 30, 2009 2:02 am
by 93dx4drcivic
hey what pistons should i put on my d15b7 engine that will give me some more power to my non vtec engine

PostPosted: Wed Sep 30, 2009 2:34 am
by Dippin_EG
for real, all the money youd spend for them could just be used for a d16z6 or d15b. thats how i'd go. :thumb:

PostPosted: Wed Sep 30, 2009 3:06 am
by JUICE
Dippin_EG wrote:for real, all the money youd spend for them could just be used for a d16z6 or d15b. thats how i'd go. :thumb:


x2


get a long block for 500 and put it right to your tranny. you'll be much happier . or even cheaper do a mini-me.

PostPosted: Wed Sep 30, 2009 3:14 am
by 3kkl3sia
believe me, i tried to convince him to get a z6 head and do a mini-me.
but he wants a b7 head becuase he doesn't know how to wire up VTEC.

PostPosted: Wed Sep 30, 2009 3:28 am
by teal_dx
it's 2 wires and a ground... a lot easier than replacing a set of pistons :thumb:
http://www.civic-eg.com/viewtopic.php?t=10 <-- mini-me swap diy

PostPosted: Wed Sep 30, 2009 3:50 am
by 93dx4drcivic
cant find a vtec d16 head yet ya dick 3kkl3sia

PostPosted: Wed Sep 30, 2009 4:48 am
by Apexracing
drive to a junk yard, there are two up here in my area i might be getting one if my sedan has a bad head.

PostPosted: Thu Oct 01, 2009 1:49 am
by Greasedmonkey
D15b sohc vtec. or a z6. Both can be had for cheap. Must better starting point than a Mini-me. More support period.

PostPosted: Thu Oct 01, 2009 2:36 am
by 3kkl3sia
go to gary's, i tried telling you to go but you wont.
its cheaper then the b7 for 75 you said your going to buy
and its 100% better. they have one, somewhere up there