N/A build discussion
User avatar
By 93hatcheg
#139848 like the title says are they?
and will the fit in my z6 with no problems to increase the compression to 11.7:1 according to zealautoworks compression calculator.

will the new oem z6 piston rings i bought fit the d15b8 pistons?

im rebuilding my z7 right now and would like to know if these will work with NO hidden problems
User avatar
By teal_dx
#139865 the d15b8 is the shit 70 hp cx motor. I would not put any internals from a d15b8 into a high compression d16z6 :thumb:

There's a certain piston that you can use for high compression, the GX piston will get you around 12 cr.
http://www.google.com/#hl=en&source=hp& ... 0d9e542c1e
User avatar
By 93hatcheg
#139891 the only problem is i cant find anywhere to get d16a1 pistons or gx pistons.( i want the a1 pistons cause its gonna be my dd)
User avatar
By Bobec
#140058 sry for a little OT, but will z6 piston rings fit on d16a6 pistons? :?
User avatar
By teal_dx
#140059 they are the same mm, but I would check with the company selling the parts to check the part #'s.

according to Honda, the d16z6:
http://www.hondaautomotiveparts.com/aut ... AFT-PISTON

and d16a6:
http://www.hondaautomotiveparts.com/aut ... AFT-PISTON

use different part #'s
User avatar
By d-mon
#140064 P29's w/rings are on ebay all day
YCP is tha brand you want.
Here are some 75mm:
http://cgi.ebay.com/ebaymotors/YCP-P29- ... .m20.l1116
i always buy rings at the same time i buy pistons

PG6 is for the Natural Gas powerd 2001-03 GX.
not very good for D16's (deck height), but almost perfect for D15 with 137mm rods.
in the US it is almost impossible to get these.
all Honda Dealers (Majestic, etc) have them on indefinite backorder.
User avatar
By xNETZx
#150653 best use d13 pistons they will give you biggest compression
Image
from left to right
d16a1
d15b2
d13b2 :)
User avatar
By Greasedmonkey
#150804 does that say PM1G?

we dont get that motor here, so we cant use those pistons.
User avatar
By xNETZx
#150900 sorry i totally forgot that d13 is only edm
By project ej2
#158509 dont know if im asking in the right section.. but. will d16z6 pistons fit or be better then the d15b7 ones.? or should i just leave the block alone with the d16b7 pistons it already has... :? :? :? :? :? is that a smart move or not...? please let me know..
By project ej2
#158674 ok thanks i will do so..right now...