Page 1 of 1

Tach and Speedometer not working.

PostPosted: Sun Dec 04, 2011 5:41 pm
by grrttwright
I have a eg hatch with a b16a2 swap. everything is converted to obd1. my problem is that my gauge cluster isnt working. The lights and everything work. gas gauge and temp both work. but tach and speedometer wont work. i have tried everything i can think of.

PostPosted: Sun Dec 04, 2011 7:46 pm
by Fada Blayne
check ur dizzy and vss

PostPosted: Sun Dec 04, 2011 10:48 pm
by grrttwright
Fada Blayne wrote:check ur dizzy and vss


Dizzy is good. i have checked it.

PostPosted: Tue Dec 13, 2011 1:12 pm
by BaTzEG92
Granted you haven't posted back in a while...so you may have already fixed this.

But I second the VSS. Mine went bad (plus the harness was loose) and my tach and speedo would actually bounce around when I hit bumps. Like, I'd be doing 60mph and speedo would be flat, I'd hit a bump and speedo would jump to 45 and back to zero :)

PostPosted: Tue Dec 13, 2011 2:23 pm
by grrttwright
what is the vss? i tried a third one and it works perfectly. i have torn mine apart and put is back together and still no luck..

PostPosted: Tue Dec 13, 2011 4:04 pm
by BaTzEG92