Civic EG

im plannin on finishing my engine wire tuck as i have done like 60% of it and also completly tucked the headlight harness's.....

however i wanna know how hard is it to tuck all those damn hydrolic lines for the brakes and clutch.

i DONT wanna put them in the cabin cause imo thats just stupid you would get brake fluid everywhere when you had to work on the system.

i wanna move the prop valve down about a foot behind the motor and instead of having lines everywhere just have a line of 4 going striaght down the fire wall

does anybody if this idea is possible? i basically wanna tuck the lines withought making them completly disapeer lol.

since you have to bend all the lines yourself when you do a brake line tuck, id imagine you could put the prop valve anywhere you wanted as long as you can get lines to work.

yea thats what i figured. u guess im wondering if there are any guidlines or things i must do to keep all my hydrolic parts workin correctly? also how hard is it to make your own lines? anyone know?

yes it"s ok

you'll need a tubing bender:

http://www.google.com/products?hl=en&q= ... CC8QrQQwAA

and a flare kit unless you but the pre-flared with the fittings already on the line.

Same for the clutch line but you can use a stainless steel braided line and -AN fittings for that if you want.

Some people on HT have don't the same for the brake lines but I would not recommend it.