Page 1 of 1
TAKIN OFF TINT??

Posted:
Wed Apr 07, 2010 9:39 pm
by umana12
Anyone know how to take off tint witout using the steam cleaner..previous owner had ugly ass tint

Posted:
Wed Apr 07, 2010 9:49 pm
by TrailerTrash
you take a new razor blade and slowly scrape at the corners till you can peel it off little by little. or you can heat the glass up and peel it off easier. then take windex and soak all the glue residue and scrap it off with a razor blade. you can also use brake/parts/carb cleaner to disolve the glue but that can seriously ruin the door panels and whatever interior pieces it gets on

Posted:
Wed Apr 07, 2010 9:50 pm
by Chance
edit* he beat me to it ^


Posted:
Wed Apr 07, 2010 10:01 pm
by umana12
thing is the tint so bad that it dont peel off instead it just breaks off..i did one window wit a razor blade and it took me 2 hrs cuz it kept breaking..

Posted:
Wed Apr 07, 2010 10:08 pm
by Chance
You can use Aircraft paint stripper as well. Just DON'T get it on your interior anywhere. Just spray it on and let it sit.. make sure your in a ventilated area (not in a garage) and open the doors and everything else to allow the fumes to flow out.

Posted:
Wed Apr 07, 2010 10:09 pm
by Chance
You'll still need to use the razor blade but it will make it a whole hell of alot easier!

Posted:
Wed Apr 07, 2010 10:16 pm
by umana12
ok cool..will do

Posted:
Wed Apr 07, 2010 10:22 pm
by Method
pay someone to do. too much work.

Posted:
Wed Apr 07, 2010 11:08 pm
by Ajax1989
retint bro.. you live in socal thats all im sayin lol


Posted:
Wed Apr 07, 2010 11:12 pm
by ikon
use a household cleaner with ammonia like windex. spray the window down and place a thick black trash bag over it. it should stick to the soaked window. do this on a hot day and give it like 15 min to evaporate. the back will force the ammonia to go through the tint and will lift the glue. it should just peel off. i just did mine nd it worked great. no razor blades or ruined interior.


Posted:
Thu Apr 08, 2010 6:09 am
by umana12
94_jdm_ferio wrote:retint bro.. you live in socal thats all im sayin lol 
haha yea true...
^^ sounds good..ill try this one

Posted:
Thu Apr 08, 2010 5:17 pm
by blk92hb
use a household cleaner with ammonia like windex. spray the window down and place a thick black trash bag over it. it should stick to the soaked window. do this on a hot day and give it like 15 min to evaporate. the back will force the ammonia to go through the tint and will lift the glue. it should just peel off. i just did mine nd it worked great. no razor blades or ruined interior.
x2

Posted:
Thu Apr 08, 2010 5:26 pm
by 95c1v1c
I took my baked on tint off with one of those steamers that have the hose. Took a while to get it all, but it left no residue and I didn't have to deal with fumes

Posted:
Thu Apr 08, 2010 6:04 pm
by ChicagoMike
A thread I made a few years ago on another forum.......
http://www.azht.net/forum/showthread.php?t=15512

Posted:
Fri Apr 09, 2010 5:39 am
by umana12
already did it using windex..but where would u get the airplane coat remover??