crankshaft pulley
Posted: Mon May 12, 2008 4:07 pmtha bolt dat holds my pulley in place broke off nd most of it is still stuck in there.......how do i get dat out???
Page 1 of 1
Posted: Mon May 12, 2008 4:07 pmPosted: Mon May 12, 2008 5:26 pmcould use easy out or take it to machine shop
Posted: Sat May 17, 2008 9:37 amDC4rob wrote:could use easy out or take it to machine shop
Easy out?
Posted: Sat May 17, 2008 12:19 pmThis is what easy outs are
Posted: Sat May 17, 2008 4:12 pmsqsi wrote:This is what easy outs are
Ah! that i know
Had to use them on two of my exhoust bolts
Posted: Mon May 19, 2008 12:07 amthanks i got it out yesterday.......now i just need 2 figure out how tha belts go, im kind of new 2 dis
Posted: Mon May 19, 2008 1:20 amyou have the alternator belt, some have power steering and some have ac. Which ones does yours have?
Posted: Fri May 23, 2008 7:36 pmi have tha pulley wit tha alternator, power steerin nd a/c
Posted: Fri May 23, 2008 8:11 pmI think ac is on the inside, then alternator in the middle, then power steering on the outside. not 100% sure on the AC though, my car doesn't have it.
You'll know for sure when you start to put the belts on, things will line up
You'll know for sure when you start to put the belts on, things will line up
Posted: Fri May 23, 2008 10:24 pmalternator is the one closest to the block.
Posted: Sat May 24, 2008 1:49 amTrue, and p/s is the outer one.