Civic-EG.com Forum 3.3.1

- Sun Oct 26, 2014 3:43 am #349413 Started putting o2 sensor in but ran out of day light waiting for the socket. The wrench I planned to use wasn't cutting it. Will be finished up in the morning.

Getting High, Sitting Low
My Build http://civic-eg.com/viewtopic.php?p=339056#339056

- Mon Oct 27, 2014 1:34 am #349419 O2 sensor got replaced today. Reset ecu and no more engine light. I checked my spark plugs and gave them a little cleaning with a wire brush and checked the gap and the car ran much better. Going to replace plugs and wires in the next week or so to finish the tune up. Thanks for the help guys problem solved

Getting High, Sitting Low
My Build http://civic-eg.com/viewtopic.php?p=339056#339056

[teal_dx]

- Mon Oct 27, 2014 4:09 pm #349436 Excellent news

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Oct 27, 2014 9:16 pm #349450 I just want to ask my little service plug I put the paper clip in was Un plugged I found it and another with 3 holes. They were both not connected to anything just wondering if they need to be plugged in or not.

Getting High, Sitting Low
My Build http://civic-eg.com/viewtopic.php?p=339056#339056

- Tue Oct 28, 2014 1:20 am #349459 You talking about the one you jumper to check the codes? it's not supposed to be plugged into anything.

- Tue Oct 28, 2014 3:15 am #349460 Okay thanks man just double checking

Getting High, Sitting Low
My Build http://civic-eg.com/viewtopic.php?p=339056#339056