Civic EG

What motor should I go with a k20a or a b series and where would y'all recommend to buy motors online or just a pick n pull

Welcome,

In choosing a motor should be on your past experience or should be based on what your trying to accomplish with the build. Lots of parts for both platforms, just all depends on the type of build and what your end result for HP is going to be .

Hope this guides you in better path.

Also your mechanical ability (if you're doing the work yourself) and budget.

Very tru on what Teal_dx has posted.

Dont go over board on something your not familiar with.

What would be faster to swap a b swap or kswap and would yall recommend hmotoronline

I don't speak much but it seems that your kind of disregarding what everyone has told ya thus far and if your asking which is a faster swap I would assume you don't have much experience mechanically at least with hondas..

So i would suggest get a B18b or a B20 with all the parts needed to swap its a direct swap over no drilling needed which is needed with a K. Good decision on importing a motor im not to very experienced with the site but i have heard generally good things about Hmotorsonline

A B swap is easier and takes less time than a K swap.

i say go k swap just b/c you will never regret it in a few years.