- Thu Mar 15, 2012 2:30 pm
#298356
Ill have what comes in that kit, and ill upgrade my waterpump. and tbelt... is there anything else besides getting the rodbolts I should look into getting...
- Fri Mar 23, 2012 5:40 pm
#299531
Okay , So I should be ordering most of this come Sunday, I Sold my Evos Old rims ( Rota P45F's 18x9.5 114.3 +25 off set )
So Ill be ordering that Kit I posted eariler... and talkin about upgrading the rod bolts. is this a good deal?
http://www.lightningmotorsports.com/arp ... 61587.aspx
These are the right ones?
So Ill be ordering that Kit I posted eariler... and talkin about upgrading the rod bolts. is this a good deal?
http://www.lightningmotorsports.com/arp ... 61587.aspx
These are the right ones?
- Fri Mar 23, 2012 7:01 pm
#299538
Those are main studs. You dont need those. You need these:
http://www.lightningmotorsports.com/arp ... 61501.aspx
Hatch-O-Doom wrote:Okay , So I should be ordering most of this come Sunday, I Sold my Evos Old rims ( Rota P45F's 18x9.5 114.3 +25 off set )
So Ill be ordering that Kit I posted eariler... and talkin about upgrading the rod bolts. is this a good deal?
http://www.lightningmotorsports.com/arp ... 61587.aspx
These are the right ones?
Those are main studs. You dont need those. You need these:
http://www.lightningmotorsports.com/arp ... 61501.aspx
RWMIII wrote:A little piss ant like you isnt worth being banned over.
EG6b20R wrote:Yea he has a bad habit of being overly sarcastic.. .. at the wrong times..
- Fri Mar 23, 2012 7:15 pm
#299541
Damn it so Close yet so far away... I was looking for those... I found them once before but couldnt find them again...
Well I will be ordering those and the kit. Then getting a new water pump. and well it should be a nice fun weekend
Well I will be ordering those and the kit. Then getting a new water pump. and well it should be a nice fun weekend
- Sun Mar 25, 2012 5:26 pm
#299772
The Part List that I am ordering in about a week-or 2
Water Pump
http://www.lightningmotorsports.com/gat ... 44367.aspx
ARP Connecting Rods
http://www.lightningmotorsports.com/arp ... 61501.aspx
LS-V Conversion Kit
http://www.lightningmotorsports.com/lig ... 69919.aspx
Timing Belt (not sure I wanna use this one ) Recomendations Welcome
http://www.lightningmotorsports.com/gre ... 39324.aspx
And Maybe this little guy
http://www.lightningmotorsports.com/aem ... 47886.aspx
Map Sensor 4Bar
http://www.lightningmotorsports.com/sve ... 73354.aspx
and after all this is in/installed car will be goin back on the dyno...
Please give some feedback on the timing belt (good or bad other?)
Ditch the AEM Tru cam gear or keep em?
Thats whats gonna get ordered as soon as I sell my Rotas, and a few other things from some Old projects.
Water Pump
http://www.lightningmotorsports.com/gat ... 44367.aspx
ARP Connecting Rods
http://www.lightningmotorsports.com/arp ... 61501.aspx
LS-V Conversion Kit
http://www.lightningmotorsports.com/lig ... 69919.aspx
Timing Belt (not sure I wanna use this one ) Recomendations Welcome
http://www.lightningmotorsports.com/gre ... 39324.aspx
And Maybe this little guy
http://www.lightningmotorsports.com/aem ... 47886.aspx
Map Sensor 4Bar
http://www.lightningmotorsports.com/sve ... 73354.aspx
and after all this is in/installed car will be goin back on the dyno...
Please give some feedback on the timing belt (good or bad other?)
Ditch the AEM Tru cam gear or keep em?
Thats whats gonna get ordered as soon as I sell my Rotas, and a few other things from some Old projects.
Last edited by Hatch-O-Doom on Mon Mar 26, 2012 3:38 am, edited 1 time in total.
- Mon Mar 26, 2012 3:40 am
#299825
Link to belt Fixed...
As for why get a 4bar?
Well tuner recomanded me to get a 4bar to be able to tune the car to higher boost, and so that the car can read it better and not freak out...
I am only running 12psi right now but will run a bit more when This set up is in.... like 15-20psi with the new tune..
Does this sound like a solid foundation to start the swap with?
As for why get a 4bar?
Well tuner recomanded me to get a 4bar to be able to tune the car to higher boost, and so that the car can read it better and not freak out...
I am only running 12psi right now but will run a bit more when This set up is in.... like 15-20psi with the new tune..
Does this sound like a solid foundation to start the swap with?
- Mon Mar 26, 2012 6:57 pm
#299871
Well, Got all the Stuff I needed to sell and then a little more
Wish I could have sold some other left over parts but no one wanted them...
But either way, That whole list should be getting ordered as soon as I can deposit the money into the bank, which should be this friday or saturday and order everything
Wish I could have sold some other left over parts but no one wanted them...
But either way, That whole list should be getting ordered as soon as I can deposit the money into the bank, which should be this friday or saturday and order everything