Civic-EG.com Forum 3.3.1

- Thu Mar 17, 2011 6:24 pm #244504 Is that...

- Thu Mar 17, 2011 6:53 pm #244512 What engine is it dude? Does it have an aftermarket inlet manifold?

I can't work that picture out

1993 Dx Hatch & 1993 Esi Hatch.

- Thu Mar 17, 2011 7:14 pm #244519 Jdm d15b dual carb...identical to d15b4

- Thu Mar 17, 2011 7:17 pm #244520 Jdm d15b dual carb...identical to d15b4

- Fri Mar 18, 2011 4:34 am #244608 get us a better picture of the manifold itself.

what ever is in the picture doesnt look like a PCV to me.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Fri Mar 18, 2011 11:09 am #244642 Hope this pics can't help...can the valve be on the underside of the manifold?

- Fri Mar 18, 2011 11:56 pm #244786 Hey I jus remembered I had a motor in the backyard so I checked it out and I remove this. From this black box located just above the oil filter can this be related to the pcv or is this where it is located

[suspendedHatch]

- Sat Mar 19, 2011 5:43 pm #244870 Is that just an open valve or is there a check ball inside? The PCV will have a check ball, but those older engine designs didn't use one. You can follow that hose to the intake manifold to verify that there's no PCV.

I've only seen those intake manifolds on 3rd generation Civics.

- Sat Mar 19, 2011 7:53 pm #244890 The plastic piece in my hand didn't have anything on the inside it was just hollow I'm startin to believe I don't have a pcv but ii will try to follow that hose and see where it leads

- Wed May 04, 2011 7:44 pm #253676 im almost positive that is where it shoulda been so maybe it needs a new 1 put in there