Civic-EG.com Forum 3.3.1

- Mon Aug 23, 2010 9:23 pm #210208 so yer what could i use to fill them as thay are prity mashed up after engine swap ? . some 1 said to use urethane adhesive ? just wounding what elss will be strong to use ?

MR EJ-EBAY! THE EBAY KING

- Mon Aug 23, 2010 9:38 pm #210210 jus use the urethane dude,

"If you have poo, fling it now"!.

- Mon Aug 23, 2010 9:42 pm #210212 hmm but what sort as i keep finding all sorts ..... might sound dum but would gum gum work good ?

MR EJ-EBAY! THE EBAY KING

- Mon Aug 23, 2010 10:02 pm #210214 Just buy new mounts... Inovative mounts r preety cheap and they come in different Finnishs

i pitty the foo who aint got vtec......
EM1 build http://civic-eg.com/viewtopic.php?t=17256

- Mon Aug 23, 2010 10:22 pm #210220 i just looked thay ant cheap lol ill stick with just filling them

MR EJ-EBAY! THE EBAY KING

- Mon Aug 23, 2010 11:48 pm #210229 heres a link
http://www.civic-eg.com/viewtopic.php?t=30

"If you have poo, fling it now"!.

[suspendedHatch]

- Wed Aug 25, 2010 6:32 pm #210534 I prefer to put motor mount inserts into the two front lower mounts and then buy a new rear mount on ebay and leave the inserts out. Vibration is just a bit worse than stock but not nearly as bad as when you put the inserts in the rear mount.

You feel the improvement the most when shifting.

- Thu Sep 02, 2010 5:05 pm #211847 Use 3m window weld. You can get it at autozone. I used it on all my mounts when I did my swap and it works great. It took 1 1/2 tubes for all of my mounts so one tube should work for you.