General engine questions/issues that aren't specific to the other categories
By thirdson
#191102 Alright i am going to convert an auto d15b civic to a b16a2 manual. I know how to do a manual to manual but not an auto to manual; conversion.

Im just wondering since its auto to manual, what needs to be done? Would i have to touch the loom? And i heard i may have to drill onto the shifter hole? And what about the mounts or is it straight bolt on?
User avatar
By forcefedEG
#191118 you will need an auto to manual conversion mount, innovatie mounts or hasport are both good supliers (i like innovative more) you will need pedals, clutch master cyl, and the hard lines to do it, honestly there are alot of threads on here aobut this, it maybe worth your time too take a look around :thumb: and im not so sure you started this thread in the right section, it should probally be in the chasis section... so dont be suprised if it gets moved :wink:
User avatar
By teal_dx
#191123 I'm going to move it to the Transmission section :thumb:

I keep saying I need to put together a DIY on how to do this... it's such a common mod to do.

Here's some links that will be helpful:
http://civic-eg.com/viewtopic.php?t=388
http://civic-eg.com/viewtopic.php?t=9350
http://civic-eg.com/viewtopic.php?t=14450
http://civic-eg.com/viewtopic.php?t=14396
http://civic-eg.com/viewtopic.php?t=13242
By thirdson
#191293 Thanks for the links..Yeah i just noticed it was in the wrong section sorry for that.