Civic EG

impossible.......

ive broken 3 ratchets. i have a huge breaker bar. we tried 3 different impact guns all the way up to 600ft/lbs. i snapped part of the pulley off tryingto shove something betwwen it nd the block. i did the screwdriver in tranny thing but it wont hold.

plus i have the jdm d15b and the pulley it has is open in the center so i cant use that hex key tool thing.

sssoooooooooooo wht do i do?

is the engine in or out of the car? if out, is there a tranny on it?

I'm hoping you already used PB blaster on it?

do you have one of these?



I don't know if the EG are the same, but I use it for the 94-97 accord and it works wonder.

Are you turning it the right way?

I was there and no we don't have that tool.... but its a jdm moter and it dosnt need it cus it dosnt have that shape inside the crankpulley to put the tool in....

teal_dx wrote:is the engine in or out of the car? if out, is there a tranny on it?

I'm hoping you already used PB blaster on it?

And no the motor is still in the car.... and what's a pb blaster????

AGree with the PB blaster. Don't think WD-40 will help you because PB is the $hit!

pray to the car god and try agian

there is this universal crank pulley tool
they look like this

or this


anyways the easiest way is to use one of those.
i had to make one myself




Now keeping the pulley still is half the battle the other is breaking it loose.
you will break tools and bend metal.
Soooo a 10 ft breaker bar will help



and then all is good till a lead pipe bends


but use heat on it! comes off like nothing!
and a crazy setup like this one and youll have it off in minutes

mannnn come down here with ur tools and help us.... ur awsome
and y did u take out ur motor mount???

hahha thanks

if you dont have the tools, make them...
and if you dont have the tools to make tools.....then

use a old head bolt to hold it still

i remember seeing something like that as a tool (all photos above). I guess there will always be ways to break that crack bolt!

thought someone had a diy a bit back where they put the wrench on and turned teh car over?

http://www.youtube.com/watch?v=O_6SFBg7_dg

thats a good video but the only problem is from what i understand is that the cars not turning on....