How much of a bitch is the Thermostat to replace?
Posted: Fri Jan 08, 2010 11:15 pmd16z6 if needed...
Civic EG
Forum for the Honda Civic EG 1992-1995
http://civic-eg.com/forum/
How much of a bitch is the Thermostat to replace?
Page 1 of 1
Posted: Fri Jan 08, 2010 11:15 pmPosted: Fri Jan 08, 2010 11:32 pmi beleave a cupcake away! should be 2 bolts and just a quick drain n fill.
Posted: Fri Jan 08, 2010 11:42 pmagreed. Not a bitch at all.
Posted: Sat Jan 09, 2010 12:17 amits simple if you know what your doing its 3 10mm bolts i mean yea you can just stick with the two but id go with taking all 3 out the third is the harness ground.....
but first you need to take off the radiator hose and intake to get to it..
to give it a rating of difficulty 1-10 10 being hardest id go with a nice 3.5 its simple yet theres parts in the way....
but first you need to take off the radiator hose and intake to get to it..
to give it a rating of difficulty 1-10 10 being hardest id go with a nice 3.5 its simple yet theres parts in the way....
Posted: Sun Jan 10, 2010 4:15 amTake the intake off for more room to work with, and remove the rad hose before loosening those 2 bolts.
and make sure the 2 "knobs" are aligned before putting that cover back on.
and make sure the 2 "knobs" are aligned before putting that cover back on.
Posted: Mon Jan 11, 2010 8:06 pmif you can put on a short ram intake. you can do a thermostat. remember to replace the gasket tho. 