Civic EG

hey whats up i have a b18 that stalls when warms up will a leeky o rings on 1 of my fuel injector make the engine stall

i dont think so

i had 2 of them leaking and m car ran fine..

it may i mean leaking fuel would bring about you not haveing enough fuel in the combustion chamber but are there any check engine lights as well?? since it could be a couple of things.....

idk im jus going by what the guy who i might be trading my car for says... hes saying its cause the o ring on one of them is leaking

93dx4drcivic wrote:idk im jus going by what the guy who i might be trading my car for says... hes saying its cause the o ring on one of them is leaking

well test his theory go grab some o-rings or some injectors from garys and try it out i saw that car on craigslist i think the hatch ef your talk about and itcould be something having to do with the motor swap since i do thing that that motor is well obd2 or soemthign like that but im not sure he may have done a mpfi swap i forget if it was a si or not but yea alot of things could be at fault if he did a mpfi swap

yeah it is the black primered one from waterville if it is a major problem ill jus buy a d15 head for my car and keep it hahha

93dx4drcivic wrote:yeah it is the black primered one from waterville if it is a major problem ill jus buy a d15 head for my car and keep it hahha

yea true id say just go and grab some obd0 injectors or o-rings and see or could justuse the o-rings from your car and test that out and see...if it still stalls then walk away because it looks decent but yea idk somethign about it just dosent seem right exspecially if it has a b-series motor in it and he wants to trade ya not saying your cars crap or anything but in a straight up trade youd be making out if the leaky injector is all that is wrong....idk id just go and try to see if the o-ring theory holds up since o-rings arecheap

yeah i might but im thinkin bout jus getting this d15 head for 70 bucks... can you use a d15b7 tranny on a d16z6 motor

93dx4drcivic wrote:yeah i might but im thinkin bout jus getting this d15 head for 70 bucks... can you use a d15b7 tranny on a d16z6 motor

yea you can but you wont get the acceleration like you would if you had a z6/y8 trans......so yea the b7 will bolt right up

yeah i dont need one my buddy might be getting a d16 z6 motor and will need a tranny i jus need a new head if i get a new head do i need new bolts for it to work

any time you take the head off you must replace the oem bolts as they are strech bolts.