Page 1 of 2
Are All EG's Run Off Carurators?
Posted:
Mon Jun 08, 2009 7:55 pmby James701
Hi Guys,
Im pretty new to the forums and to civics.
Just wanted to know.
Are All EG series Civics Run Off Carburators?
Because i heard that the 1,3dx's here in the UK are run off carbs.
Thanks JamesC
Posted:
Mon Jun 08, 2009 8:13 pmby egsedanguy
the 1.3 i think only came carburated. but im almost sure that the 1.5-1.6 were all fuel injected.
Posted:
Mon Jun 08, 2009 8:24 pmby Ajax1989
egsedanguy wrote:the 1.3 i think only came carburated. but im almost sure that the 1.5-1.6 were all fuel injected.
x2
Posted:
Mon Jun 08, 2009 8:39 pmby James701
Ohh Okk guys,
Thanks for the help,
I think im gonna get a 1.5LSi and JDM it
JamesC
Posted:
Mon Jun 08, 2009 8:51 pmby Ajax1989
James701 wrote:Ohh Okk guys,
Thanks for the help,
I think im gonna get a 1.5LSi and JDM it
JamesC
just make sure its muilt-port injected
cause some of the 1.5 have only 1 injector
Posted:
Mon Jun 08, 2009 8:54 pmby egsedanguy
just make sure its muilt-port injected
cause some of the 1.5 have only 1 injector[/quote]
x2
Posted:
Mon Jun 08, 2009 9:05 pmby James701
Oh damn would that be a big problem when converting?
How would i tell?
Thanks JamesC
Posted:
Mon Jun 08, 2009 9:08 pmby egsedanguy
i belive its like any other swap. you need the ecu and all the wires and componets. you might as well slap in a b16 imo
Posted:
Mon Jun 08, 2009 9:14 pmby Ajax1989
well the only cars i see the single injector is in the dx civic's, but not 100% sure, but which motor do wanna buy??
Posted:
Mon Jun 08, 2009 9:18 pmby James701
Errrrmm, i really want to go for a b16b.
But there quite hard to find a good one..
And plus ive heard things about the B16a's that they are better for turbo'ing cos of the lower compression difference (But not sure if thats trueee).
So basiclly a B16 series engine eitherway tbh.
And do you think ill need to worry about the single port if i get a 1.5LSi?
JamesC
Posted:
Mon Jun 08, 2009 9:24 pmby Ajax1989
James701 wrote:
And do you think ill need to worry about the single port if i get a 1.5LSi?
JamesC
no, i didnt see that you wanted a SI motor
i have only seen them in the DX's
Posted:
Mon Jun 08, 2009 9:30 pmby James701
Oh thats Greattt,
Thanks for the Info Guys
I'd give you positive feedback if i knew how..Lol
JamesC
Posted:
Mon Jun 08, 2009 9:41 pmby Ajax1989
James701 wrote:Oh thats Greattt,
Thanks for the Info Guys
I'd give you positive feedback if i knew how..Lol
JamesC
no problem man
GL with the build
lets see some pics!!
Posted:
Mon Jun 08, 2009 11:01 pmby egsedanguy
ya pics. and no problem with some help. that why were are here
Posted:
Tue Jun 09, 2009 1:49 amby Mr. Pink
there is the carbbed 1.3L, a carbed 1.4L, a carbed 1.5L and i believe there is a Carbbed 1.6L but dont quote me on it.