Page 1 of 1

honda rims

PostPosted: Sun May 24, 2009 6:43 am
by Ajax1989
I have tried to put a pair of 15in prelude rims on my 94 and they wouldnt fit, either they are bigger then other honda rims or something is wrong with my car, cause i see ef's and eg's with other honda rims [fat 5's, ls mesh,gsr blades,si rims,04-05 ex rims, etc...] :? idk maybe someone can help me...

thanks

PostPosted: Sun May 24, 2009 7:03 am
by chrono404
Prelude, Accord and 96spec Integra Type-R's use 4x114 bolt pattern 98spec Integra type-R and all Civic Type-Rs(to my knowledge) are all 5lug.

92-00 Civics(Non-Type-R) and 90-01 Integras(non-Type-R)'s are both 4x100.

I believe the 4lug ep3(02-03 Civic Si) Rims are also 4x100 but am not 100%.

PostPosted: Sun May 24, 2009 7:37 am
by Ajax1989
Ok, so if i bought some fat 5's they would fit?

PostPosted: Sun May 24, 2009 1:33 pm
by pedroa06
yup!!!
fatfives look clean slammed and polsihed!!!

PostPosted: Sun May 24, 2009 4:11 pm
by chrono404
94_jdm_ferio wrote:Ok, so if i bought some fat 5's they would fit?

Del Sol fat5's will work, So will LSwebs, GSR Blades, GSR Fat 5's, Si's, BMW Bottle Caps, Enkei 92's.

They all are the 4x100 Bolt Pattern. They all look good on Eg's.

btw pics on your prelude rims. If they are the prelude si's. you can get 99-00 Civic Si Rims(known as Si's) and they look very very similar and will bolt straight up.

PostPosted: Sun May 24, 2009 5:56 pm
by Ajax1989
Ok, i thought something was wrong with my car, but thanks guys!! :thumb: