Technical Topics specific to the 4 dr. Sedan body - NOT where you post pics/build specs of your car.
User avatar
By Loaf31
#355860 Hey guys. So I know this topic has been explored before. I just want an answer. Will the coupe front end (fenders, bumper, and hood) fit on the sedan and look okay without cutting or welding? Also need to know if the sedan front end will fit on a coupe. Looking to swap front ends with a coupe. Somebody let me know If this is possible! Thanks so much :thumb:
User avatar
By iLLson
#356152 alh081's build thread.
viewtopic.php?f=61&t=28894

he stitched the 2 bumpers together.
to me, that is the easiest way.

fenders are different in length so you will have to either custom a front bumper or custom the fenders.

you can however fit the coupe bumper on to the sedan fenders but it will leave gaps and look like crap
By Bennett Hogan
#357703 It can be done without swapping fenders. Just have to drill new holes in the bumper. The look is as good as most body kits. The hood lines don't match up at all so that does need to be swapped. I haven't done my yet but paint hides the fact the lines don't meet. Fog lights are a challenge as the bumper for the coupe/hatchback is narrower than the sedan so the bumper support will have to have notches cut out for each assembly. The results are worth it.
[img][<a href="http://s1380.photobucket.com/user/Marcus_Hogan/media/Mobile%20Uploads/20150626_184353_zpsyqofxloy.jpg.html" target="_blank"><img src="http://i1380.photobucket.com/albums/ah175/Marcus_Hogan/Mobile%20Uploads/20150626_184353_zpsyqofxloy.jpg" border="0" alt=" photo 20150626_184353_zpsyqofxloy.jpg"/></a>img]