Page 1 of 1
My eg
Posted:
Fri Aug 28, 2009 10:04 pmby SikEG
Hey everyone im a newbie here with a JDM passion i have a eg with a gsr dashboard swap and i have a question. What door pannels do i use to fit the stock ones dont fit do i have to fab them or is there a lttle sec
ret ?
Posted:
Fri Aug 28, 2009 10:06 pmby Vti93T
Welcome..I'm pretty sure there was another person on here that swapped an integra dash in and I think you have to do some cutting to the dash to make it fit or something. Do a search on here and it might help ya out a little more
Posted:
Fri Aug 28, 2009 10:11 pmby chrono404
If you use a heat gun and heat up the front of the panals then slam the door it will mold to accept the new dash. Or so I have read.
You can try fabbing Integra door panels onto the EG Doors. There will be more fabricating but that's what comes with custom parts.
Out of Curiosity why do you have a Integra Dashboard in your EG if you have a "JDM Passion? Did the car come that way?
Pics?
Posted:
Sat Aug 29, 2009 2:56 amby teal_dx
welcome to the site!
Posted:
Sat Aug 29, 2009 2:47 pmby Punksz6
Welcome..
Posted:
Sat Aug 29, 2009 4:14 pmby Dippin_EG
welcome to the site
post some pics in the your ride section.
Posted:
Mon Aug 31, 2009 12:46 amby marquisdee1018
welcome to the site.
Posted:
Mon Aug 31, 2009 2:30 amby Chance
