Technical Topics specific to the 2 dr. coupe body - NOT where you post pics/build specs of your car.
User avatar
By chnzgoofball
#9029 clean ride!! :thumb:
User avatar
By asianrob
#9099 that is bitchin!!
User avatar
By vtec_gloucester
#9102 very cool... :thumb:
User avatar
By chnzgoofball
#9122 nice show us some pics when u get the brakes in!! :thumb:
By hardcorehonda
#9126
chnzgoofball wrote:nice show us some pics when u get the brakes in!! :thumb:


that can take a while..... i need 16" rims to clear the calipers and rotors.
User avatar
By stefan
#9127 Only 16 inch?
That's not too bad, what are you thinking of, Rota's or something?
I'd know what rims to get when I'd have the money (something involving the words '5zigen' and 'bronze' :D ).
User avatar
By LaMbErT*
#9128 woop woop s2k breaks ftw mang!
User avatar
By vtec_gloucester
#9133 looking very good, cant beat abit of s2k stopping power :thumb:
User avatar
By sihatch9508
#9170 i dig it man. very nice clean look to your car which i love. you do some damn good work too :thumb:
User avatar
By stefan
#9193 Getting decent things to Holland is:
OR (very) expensive,
OR not possible.

So we have to do a lot ourselves.

Also, unfortunately, these hubs are DC2, and a S2k brake disc clicks right into place on a EG6 hub.
All you have to do then is redrill the discs so they match with the 4 holes in the hub itself.
For those who don't know; the DC2 ITR has another offset, wich is why HH had to grind of some material from his hubs.
HH, correct me if I'm wrong tho, only reproducing what I've read recently ;)
By hardcorehonda
#9216
stefan wrote:Getting decent things to Holland is:
OR (very) expensive,
OR not possible.

So we have to do a lot ourselves.

Also, unfortunately, these hubs are DC2, and a S2k brake disc clicks right into place on a EG6 hub.
All you have to do then is redrill the discs so they match with the 4 holes in the hub itself.
For those who don't know; the DC2 ITR has another offset, wich is why HH had to grind of some material from his hubs.
HH, correct me if I'm wrong tho, only reproducing what I've read recently ;)


Thata alomost correct... the offset is not why i'm milling the hubs..
The eg6 hubs are smaller in diameter.. they are also thinner.. thats where the offset difference come's into view.

The DC2 hubs are milled to the right diameter so the rotors will fit now..
But i need to check the DC2hub/EP1s2k rotor offset combo...
I maybe need to shim the rotors or mod the caliper.
But first things first......
User avatar
By chnzgoofball
#9238
hardcorehonda wrote:
chnzgoofball wrote:nice show us some pics when u get the brakes in!! :thumb:


that can take a while..... i need 16" rims to clear the calipers and rotors.

i would figure hahaha stock s2k rims are 16 so i would figure u had to get 16 to fit those brakes but i cant wait to see and hear how the improvement would be hahhaa :thumb: :lol:
User avatar
By projecthonda
#15848 i love the first pic,, very nice presentation :thumb:
User avatar
By Rice2NiceEG
#15950 I'm lovin it!