need help with interior wiring in my ej1
Posted: Mon Feb 13, 2012 7:25 pmwill a 2 door interior wiring harness from a automatic work in a 2 door manual. both cars are 94 civic ex. kinda noob question
Civic EG
Forum for the Honda Civic EG 1992-1995
http://civic-eg.com/forum/
need help with interior wiring in my ej1
Page 1 of 1
Posted: Mon Feb 13, 2012 7:25 pmPosted: Mon Feb 13, 2012 7:45 pmbump
Posted: Mon Feb 13, 2012 7:54 pmsure will. and when you say manual you mean transmission and not the power options (windows/locks/etc.) right?
Posted: Mon Feb 13, 2012 7:55 pmmanual transmission
Posted: Mon Feb 13, 2012 7:57 pmin that case you are good on the interior harness
Posted: Mon Feb 13, 2012 8:30 pmThere's going to be some differences you should be aware of:
- Auto uses the blue interlock box up under the drivers side dash- you can ignore that box & leave it behind.
- Auto has the harness/plug for the console shifter. The 2 thick wires from this plug should be ran to the clutch safety switch on a manual car.
- There's 2 other wires in that plug (unsure of the colors) that should go to the reverse sensor on a manual transmission car. This will make the reverse lights work.
- Auto uses the blue interlock box up under the drivers side dash- you can ignore that box & leave it behind.
- Auto has the harness/plug for the console shifter. The 2 thick wires from this plug should be ran to the clutch safety switch on a manual car.
- There's 2 other wires in that plug (unsure of the colors) that should go to the reverse sensor on a manual transmission car. This will make the reverse lights work.
Posted: Mon Feb 13, 2012 8:47 pmteal_dx wrote:There's going to be some differences you should be aware of:*2
- Auto uses the blue interlock box up under the drivers side dash- you can ignore that box & leave it behind.
- Auto has the harness/plug for the console shifter. The 2 thick wires from this plug should be ran to the clutch safety switch on a manual car.
- There's 2 other wires in that plug (unsure of the colors) that should go to the reverse sensor on a manual transmission car. This will make the reverse lights work.
Posted: Tue Feb 14, 2012 4:11 amteal_dx wrote:There's going to be some differences you should be aware of:thanks. good info to know
- Auto uses the blue interlock box up under the drivers side dash- you can ignore that box & leave it behind.
- Auto has the harness/plug for the console shifter. The 2 thick wires from this plug should be ran to the clutch safety switch on a manual car.
- There's 2 other wires in that plug (unsure of the colors) that should go to the reverse sensor on a manual transmission car. This will make the reverse lights work.