- Wed Jan 18, 2012 1:37 am
#290653
Ok so i know its cold out side but...
My car needle wont get off C if i get in and start it and drive.
So my heat wont be blowing hot.
BUT....
If i start it and let it sit and let it run and heat up then it goes up.
Then when its in the middle i drive it and it stays in the middle.
Same thing happens to my buddys ek
btw my fan doesnt come on since i have the fan switch manually
so it wont because the fans cutting on,
there are no leaks i did a leak down test, and it didnt even budge
i also replace the heater core and Both upper n lower hoses and all heater hoses
My car needle wont get off C if i get in and start it and drive.
So my heat wont be blowing hot.
BUT....
If i start it and let it sit and let it run and heat up then it goes up.
Then when its in the middle i drive it and it stays in the middle.
Same thing happens to my buddys ek
btw my fan doesnt come on since i have the fan switch manually
so it wont because the fans cutting on,
there are no leaks i did a leak down test, and it didnt even budge
i also replace the heater core and Both upper n lower hoses and all heater hoses